home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Winzipper
/
Winzipper_ISO.iso
/
nt4.0 server
/
DRVLIB.NIC
/
SKFMNT
/
@0083.ADF
next >
Wrap
Text File
|
1996-07-31
|
8KB
|
196 lines
; Adapter Description File Version 1.2 93/08/26
; device name: SK-NET FDDI-FM
; file name: @0083.adf
; Copyright (c) 1992 by Schneider & Koch
;-------------------------------------------------------------------------------
;-------------------------------------------------------------------------------
AdapterID 00083h
;-------------------------------------------------------------------------------
AdapterName "SK-NET FDDI-FM/FDDI Network Adapter"
;-------------------------------------------------------------------------------
NumBytes 3
;-------------------------------------------------------------------------------
FixedResources
;POS_PROG_EN disabled
POS[1]=0XXXXXXXb
;POS_PAGE<2..0> = 0
POS[1]=XXXXX000b
;-------------------------------------------------------------------------------
NamedItem Prompt "I/O Port Address Location"
Choice "0200-03ff" POS[2]=XX000000b IO 00200h-003ffh
Choice "0600-07ff" POS[2]=XX000001b IO 00600h-007ffh
Choice "0a00-0bff" POS[2]=XX000010b IO 00a00h-00bffh
Choice "1200-13ff" POS[2]=XX000100b IO 01200h-013ffh
Choice "2200-23ff" POS[2]=XX001000b IO 02200h-023ffh
Choice "4200-43ff" POS[2]=XX010000b IO 04200h-043ffh
Choice "8200-83ff" POS[2]=XX100000b IO 08200h-083ffh
Choice "fe00-ffff" POS[2]=XX111111b IO 0fe00h-0ffffh
Choice "fa00-fbff" POS[2]=XX111110b IO 0fa00h-0fbffh
Choice "f600-f7ff" POS[2]=XX111101b IO 0f600h-0f7ffh
Choice "ee00-efff" POS[2]=XX111011b IO 0ee00h-0efffh
Choice "de00-dfff" POS[2]=XX110111b IO 0de00h-0dfffh
Choice "be00-bfff" POS[2]=XX101111b IO 0be00h-0bfffh
Choice "7e00-7fff" POS[2]=XX011111b IO 07e00h-07fffh
Help "I/O Port Address Location : Each FDDI adapter installed is assigned
a unique address location.
I/O Port address location needs only to be changed if it is in conflict
with another adapter.
Conflicting assignments are marked with an asterisk.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Interrupt Level"
Choice "Interrupt 9" POS[2]=11XXXXXXb INT 9d
Choice "Interrupt 10" POS[2]=10XXXXXXb INT 10d
Choice "Interrupt 11" POS[2]=01XXXXXXb INT 11d
Choice "Interrupt 3" POS[2]=00XXXXXXb INT 3d
Help "Interrupt Level: This FDDI Network adapter can operate
on one of four interrupt levels: 3, 9, 10, or 11.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "EPROM Address location"
Choice "EPROM Disabled" POS[1]=X000XXXXb
Choice "C4000-C7FFF" POS[1]=X001XXXXb MEM 0C4000h - 0C7FFFh
Choice "C8000-CBFFF" POS[1]=X010XXXXb MEM 0C8000h - 0CBFFFh
Choice "CC000-CFFFF" POS[1]=X011XXXXb MEM 0CC000h - 0CFFFFh
Choice "D0000-D3FFF" POS[1]=X100XXXXb MEM 0D0000h - 0D3FFFh
Choice "D4000-D7FFF" POS[1]=X101XXXXb MEM 0D4000h - 0D7FFFh
Choice "D8000-DBFFF" POS[1]=X110XXXXb MEM 0D8000h - 0DBFFFh
Choice "DC000-DFFFF" POS[1]=X111XXXXb MEM 0DC000h - 0DFFFFh
Help "EPROM Address Location: There are 7 possible 16K blocks of PC
memory that can be assigned for accessing the EPROM area of the
FDDI Network adapter.
The assignement needs only to be changed if it is in conflict
with another adapter.
Conflicting assignments are marked with an asterisk.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Remote boot on/off"
Choice "Remote boot on" POS[1]=XXXX1XXXb
Choice "Remote boot off" POS[1]=XXXX0XXXb
Help "Enables/disables booting from network.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Bus Master Arbitration Level"
Choice "Level 8" POS[0]=000XXXXXb ARB 8
Choice "Level 9" POS[0]=001XXXXXb ARB 9
Choice "Level 10" POS[0]=010XXXXXb ARB 10
Choice "Level 11" POS[0]=011XXXXXb ARB 11
Choice "Level 12" POS[0]=100XXXXXb ARB 12
Choice "Level 13" POS[0]=101XXXXXb ARB 13
Choice "Level 14" POS[0]=110XXXXXb ARB 14
Help "Arbitration level: Each Busmaster and/or DMA device is assigned an
unique arbitration level in order to arbitrate conflicting requests.
The assignment needs only to be changed if it is in conflict with
another adapter.
Conflicting assignments are marked with an asterisk.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Fairness on/off"
Choice "Fairness ON" POS[0]=XXX1XXXXb
Choice "Fairness OFF" POS[0]=XXX0XXXXb
Help "Fairness on/off: By arbitration level each participant is assigned
his priority.
Fairness on: The priority defines the seqence of granting the bus
on conflicting requests.
The latency time on bus requests is calculable.
Fairness off: Higher priority gives more time on the bus.
The latency time on bus requests is NOT calculable.
Recommended is to enable fairness.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Streaming data enable/disable"
Choice "Streaming data disable" POS[0]=XXXXXX0Xb
Choice "Streaming data enable" POS[0]=XXXXXX1Xb
Help "
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Check on forbidden 8-Bit accesses"
Choice "Check on" POS[0]=XXXX1XXXb
Choice "Check off" POS[0]=XXXX0XXXb
Help "Working as busmaster the adapter supports accesses to 32-Bit and
16-Bit memory slaves.
If the adapter performs an access to an 8-Bit slave an interrupt
may be asserted and reported (check on) or not (check off).
Recommended is to enable this check.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------
NamedItem Prompt "Check CHCK"
Choice "Check on" POS[0]=XXXXX1XXb
Choice "Check off" POS[0]=XXXXX0XXb
Help "Working as busmaster the adapter may check the control line 'CHCK'.
If the check is enabled the adapter asserts an interrupt and reports
this event.
Recommended is to enable this check.
The assignment may be changed by selecting 'Change Configuration' and
and then using the F5=Previous and the F6=Next keys."
;-------------------------------------------------------------------------------